Best Sellers
-
MBB90GGR – Glass Door Back Bar Coolers
Standard Features:
- Stainless steel exterior & interior
- Dixell digital controller
- Maintains temperatures between 33°F – 40°F
- Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
- Slide out compressor assembly for easy maintenance
- LED Interior light(s)
- Magnetic door gasket(s) standard for positive door seal
- Door lock(s) standard
- Pre-installed epoxy coated shelves
- Pre-installed casters
-
MBB48GGR – Glass Door Back Bar Coolers
Standard Features:
- Stainless steel exterior & interior
- Dixell digital controller
- Maintains temperatures between 33°F – 40°F
- Heavy duty Embraco compressor with environmentally friendly R290 refrigerant
- Slide out compressor assembly for easy maintenance
- LED Interior light(s)
- Magnetic door gasket(s) standard for positive door seal
- Door lock(s) standard
- Pre-installed epoxy coated shelves
- Pre-installed casters
-
MGF8450GR 48″ CHEF BASE
Standard Features:
• Stainless steel exterior and interior
• Stainless steel pans included
• Dixell digital controller
• Maintains Temperatures between 34°F – 40°F degrees
• Heavy Duty Embraco Controller with environmentally friendly R290 Refrigerant
• Heavy Duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed casters
• One-Piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers -
MGF8448GR 36″ CHEF BASE
Standard Features:
• Stainless steel exterior and interior
• Stainless steel pans included
• Electronic temperature controller
• Maintains temperatures between 34°F – 40°F
• Heavy duty compressor with environmentally friendly R290 refrigerant
• Heavy duty stainless steel drawer slides and rollers
• Magnetic drawer gaskets
• Recessed door handles
• Pre-installed casters
• One-piece heavy duty reinforced stainless steel top to support counter top equipment
• Gravity fed self closing drawers
• Corner Guards included
• Pull out handles included -
450 lb. ICE MACHINE YR450-AP-161
Standard Features:
- Up to 460 lb. production ice machine
(per 24 hrs) - Durable stainless steel exterior
- Air cooled condenser
- Requires use of a drain
- ETL Listed and ETL Sanitation Listed
- Removable air filter
- Power switch accessible without
panel removal
Optional Features:
-
- Optional Ice Bin #CYR400P & #CYR700P
available for purchase
- Optional Ice Bin #CYR400P & #CYR700P
Water filter recommended –
maintenance and cleaning are not
covered under warranty - Up to 460 lb. production ice machine
-
HD350-AP-161 – Hotel Ice Machine
Standard Features:
• Up to 350 lb. ice production (per 24 hours)
• Bin capacity of 160 lbs.
• Durable stainless steel exterior with black trim
• Air cooled condenser
• Requires use of a drain
• Removable air filter
• Power switch accessible without panel removal
• Includes a 3M water filter system
• Large drain pan to collect overflow
• Single push chute for easy ice dispensing
• 6’’ Legs
• NEMA 5-15P with 9’ cord -
MGF8401GR 27″ Undercounter Refrigerator
Standard Features:
- Stainless steel exterior & interior with reinforced stainless steel top
- Environmentally friendly R290 refrigerant
- Electronic temperature controller
- Maintains temperatures between 33°F – 45°F
- Recessed door handle(s)
- Self-closing door(s) with stay open feature
- Magnetic door gasket(s) standard for positive door seal
- Pre-installed casters
- One(1) pre-installed shelf per section
Optional Accessories:
Extra shelves – includes 4 shelf clips per shelf
- MGF8401GR shelf part #: W0402568
-
MGF36FGR 37″ Undercounter Freezer
Standard Features:
- Stainless steel exterior & interior with reinforced stainless steel top
- Environmentally friendly R290 refrigerant
- Electronic temperature controller
- Maintains temperatures between -8°F – -0°F
- Recessed door handle(s)
- Self-closing door(s) with stay open feature
- Magnetic door gasket(s) standard for positive door seal
- Pre-installed casters
- One(1) pre-installed shelf per section
Optional Accessories:
-
- Extra shelves – includes 4 shelf clips per shelf
- MGF36FGR shelf part #: W0402713
Equipment
Refrigeration
New Arrivals
-
Tenderizer PRO-9 SERIES
The PRO-9 Series machines are merchandising centers and offer great versatility. Use the Standard Tenderizer Cradle assembly to tenderize and knit beef products. The Strip Cutting assembly for strip cutting of beef and chicken stir-fry products, or for fajitas and julienne for salads, beef jerky strips, and beef cubing for kabobs and stews. The Star Roller assembly can punch 1/8” lasting holes in beef patties to make the beef more tender and reduce cooking time up to 40%.
Use multiple surface Scoring Rollers to enhance eye-appealing beef patties. Use the specially designed Cutlet Tenderizer Roller assembly to enhance the texture and tenderness of veal, chicken breasts, veal parmesan, veal scalopini, or squid by gently piercing the product without tearing. The PRO-9 Series machines help merchandise product by adding value to less expensive, less desirable, and less tender products, thereby enhancing your profit margin.
-
MODEL 44SSFH-LP FISH PROCESSING BAND SAWS
The BIRO 44SSFH-LP is a Heavy Duty, Stainless Steel, Fixed Head, Low Profile, Fish Processing Saw. See Specifications for various Models and Options available
SPECIFICATIONS
-
MODEL 44SSFH POWER MEAT SAW
The BIRO Model 44SSFH (Stainless Steel/Fixed Head) Power Meat Saw equipped with a 142” (3606.8 mm) Saw Blade is a heavy-duty, high-volume bandsaw that is well-suited for continuous intensive operation. The 3HP industrial motor, at 4000 feet per minute as standard blade speed, provides you with plenty of power and efficiency. BIRO’s unique EZ-Flow meat carriage with 8 Stainless Steel Bearings helps reduce operator fatigue and increase productivity. The watertight magnetic electrical controller helps ensure safe, reliable operation. The 18” (457mm) diameter saw blade wheels with a 17-5/32” (435.8mm) horizontal cutting clearance and a full 17-1/8” (435mm) vertical cutting clearance lets you cut larger product pieces than other saws. A broad range of designs, configurations, and options give you the flexibility to own a saw that fits your exact needs. The BIRO Model 44SSFH Series Power Meat Saws have superior durability and engineering features you’ve come to expect from BIRO, which means you’ll get years of reliable use, low maintenance, and minimal overall cost of ownership.
-
3334SS-4003FH (FIXED HEAD)
The Biro 3334SS-4003FH Fixed Head Meat and Fish Saw has what you need for high volume production of retail cuts. The rigid fixed stainless steel head provides vibration free operation at higher blade speeds. This lets you use a narrow blade which helps you minimize product waste, operator fatigue, and maximize productivity and profit. Like all Biro saws, the 3334SS-4003FH has heavy duty stainless steel construction and a roller bearing drive system, a design that has proven over the years to be more durable with lower maintenance. Your saw will have longer bearing life at the higher blade speeds, and it will easily withstand the heavy use typical of meat and fish plants. We also offer such attractive options as a split platter for quick blade changes, double flange wheels, a removable lower wheel, and stainless steel wheels.
-
MODEL 3334SS-4003 MEAT SAW
The industry standard 16” Meat Saws feature all stainless steel unitized welded enclosed base structure with aluminum head structure. A stainless steel head is available at extra cost. The 3334SS is of proven design, durable, reliable, and is applicable to all small, medium, and large supermarkets, and all small and medium plants. True blade alignment allows excellent blade tracking, giving dependable straight cutting year after year. A broad range of right hand feed and true left hand feed machines are available. There are numerous configurations and optional equipment to select from to meet your exact requirements.
-
MODEL 3334SS STD. (16”) MEAT SAW
The industry standard 16” Meat Saws feature all stainless steel unitized welded enclosed base structure with aluminum head structure. A stainless steel head is available at extra cost. The 3334SS is of proven design, durable, reliable, and is applicable to all small, medium, and large supermarkets, and all small and medium plants. True blade alignment allows excellent blade tracking, giving dependable straight cutting year after year. A broad range of right hand feed and true left hand feed machines are available. There are numerous configurations and optional equipment to select from to meet your exact requirements.
-
MODELS 1433 AND 1433FH (FIXED HEAD) MEAT SAWS
The BIRO Models 1433 and 1433FH (Fixed Head) Meat Cutters are compact production saws that are perfect for today’s meat room. The 3HP, totally enclosed motors and 3550 feet per minute blade speed (higher speed available at no charge) provide you with the power you need. BIRO’s exclusive EZ-flow meat carriage helps reduce operator fatigue and increase productivity. Both Model 1433’s feature a watertight magnetic starter with thermal overload protection, removable lower wheel, and double V-belt pulley drive system. Both models also incorporate the superior design and engineering you’ve come to expect from BIRO, which means you’ll get many years of use, minimal maintenance, and lower overall cost of ownership.
-
MODEL 22SS MEAT SAW W/SS HEAD
The BIRO 22SS Meat Saw, 12” (30.5cm) diameter Blade Wheels, 91” (231cm) Saw band is a smaller saw that’s ideal for small meat shops, grocery service meat counters, and fish shops. It’s 1½ HP motor has the power and size to meet your custom meat and fish cutting needs. The unitized welded stainless steel base and cast aluminum head (optional stainless head) resist corrosion and ensure long equipment life. The upper wheel assembly and lower wheel drive assembly utilize tapered roller bearings for smooth operation and low long term maintenance. It’s separated, enclosed motor compartment helps protect the motor against moisture and corrosion. The optional stainless steel head assembly and optional watertight magnetic switch assembly turn the 22SS into a perfect production saw for meat, poultry and fish cutting operations. Our 22SS incorporates the superior design and engineering you’ve come to expect from BIRO, which means you’ll get years of use, low maintenance, and lower overall cost of ownership.
CONSTRUCTION
Stainless steel base, Aluminum head standard; Stainless Steel head structure (optional – extra cost)
STANDARD FEATURES
Two saw blades • Operation and safety manual • Safety wall poster • End cut safety pusher plate.
SWITCH
Toggle, standard, 2HP rated.
HEAD AND DOOR
Aluminum, (optional stainless steel), entire assembly removable.
BASE STRUCTURE
Stainless steel.
BLADE STANDARD
Hard tooth, four teeth per inch, 5/8” (16mm) wide, .020″ (0.51mm) thick, 91” (2311.4mm) long (two supplied with each saw).
BLADE SPEED
3000 feet (914m) per minute approx.
BLADE BACK-UP GUIDES
Upper and lower blade backup guide assemblies, removable, with long life carbide back-up inserts.
BLADE WHEELS
12” (30.5cm) cast iron, chrome nickel plating, upper wheel assembly lifts out.
BEARINGS
Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.
CATCH PAN
Poly, extra deep (rounded corners) bone dust pan sealed off from other parts of base, accessible through base hinged door.
CLEANING UNIT
Stainless steel body, long life carbide guide insert, stainless steel saw cleaners, removable as a unit for easy cleaning.
DRIVE SYSTEM
Non slip silent v-belt, tension adjustable.
LEGS
Four (4) stainless steel leg bolt levelers.
MEAT CARRIAGE
Stainless steel with nylon guides and steel bearings.
MEAT GAUGE PLATE
Stainless steel faced, adjustable from 1/16” (1.59mm) to 6-1/2” (165mm) locks in position, can be disengaged, entire assembly removable for cleaning.
MOTOR COMPARTMENT
Sealed off from meat contact areas, easily accessible through removable panel door.
REAR PLATTER
All stainless steel, held in place with two push pull hold down stainless steel rods.
SAFETY END CUT PUSHER PLATE
Standard, removable.
OPTIONS (EC)
Power cord and plug • Totally enclosed motor • Watertight magnetic switch with thermal overload and under voltage protection • Stainless steel head • General purpose manual push button switch, 2HP motor • Stationary front table (see drawing at right).CERTIFICATION
U.L., N.S.F., U.S.D.A., C.F.I.A. C.S.A.: 115-60-1 & 230-60-3
WEIGHT
Uncrated: 308 lbs. (140 kg) approximate; Crated: 342 lbs. (155 kg) approximate: SS Head – add 20 lbs. (9 kg).
DIMENSIONS CRATED
L=32” (81.3 cm), W=40” (101.6 cm), H=41” (104 cm). -
MODEL 22SS MEAT SAW
The BIRO 22SS Meat Saw, 12” (30.5cm) diameter Blade Wheels, 91” (231cm) Saw band is a smaller saw that’s ideal for small meat shops, grocery service meat counters, and fish shops. It’s 1½ HP motor has the power and size to meet your custom meat and fish cutting needs. The unitized welded stainless steel base and cast aluminum head (optional stainless head) resist corrosion and ensure long equipment life. The upper wheel assembly and lower wheel drive assembly utilize tapered roller bearings for smooth operation and low long term maintenance. It’s separated, enclosed motor compartment helps protect the motor against moisture and corrosion. The optional stainless steel head assembly and optional watertight magnetic switch assembly turn the 22SS into a perfect production saw for meat, poultry and fish cutting operations. Our 22SS incorporates the superior design and engineering you’ve come to expect from BIRO, which means you’ll get years of use, low maintenance, and lower overall cost of ownership.
SPECIFICATIONS
CONSTRUCTION
Stainless steel base, Aluminum head standard; Stainless Steel head structure (optional – extra cost)
STANDARD FEATURES
Two saw blades • Operation and safety manual • Safety wall poster • End cut safety pusher plate.
SWITCH
Toggle, standard, 2HP rated.
HEAD AND DOOR
Aluminum, (optional stainless steel), entire assembly removable.
BASE STRUCTURE
Stainless steel.
BLADE STANDARD
Hard tooth, four teeth per inch, 5/8” (16mm) wide, .020″ (0.51mm) thick, 91” (2311.4mm) long (two supplied with each saw).
BLADE SPEED
3000 feet (914m) per minute approx.
BLADE BACK-UP GUIDES
Upper and lower blade backup guide assemblies, removable, with long life carbide back-up inserts.
BLADE WHEELS
12” (30.5cm) cast iron, chrome nickel plating, upper wheel assembly lifts out.
BEARINGS
Heavy duty tapered roller bearings used in upper wheel and lower bearing housings.
CATCH PAN
Poly, extra deep (rounded corners) bone dust pan sealed off from other parts of base, accessible through base hinged door.
CLEANING UNIT
Stainless steel body, long life carbide guide insert, stainless steel saw cleaners, removable as a unit for easy cleaning.
DRIVE SYSTEM
Non slip silent v-belt, tension adjustable.
LEGS
Four (4) stainless steel leg bolt levelers.
MEAT CARRIAGE
Stainless steel with nylon guides and steel bearings.
MEAT GAUGE PLATE
Stainless steel faced, adjustable from 1/16” (1.59mm) to 6-1/2” (165mm) locks in position, can be disengaged, entire assembly removable for cleaning.
MOTOR COMPARTMENT
Sealed off from meat contact areas, easily accessible through removable panel door.
REAR PLATTER
All stainless steel, held in place with two push pull hold down stainless steel rods.
SAFETY END CUT PUSHER PLATE
Standard, removable.
OPTIONS (EC)
Power cord and plug • Totally enclosed motor • Watertight magnetic switch with thermal overload and under voltage protection • Stainless steel head • General purpose manual push button switch, 2HP motor • Stationary front table (see drawing at right).
CERTIFICATION
U.L., N.S.F., U.S.D.A., C.F.I.A. C.S.A.: 115-60-1 & 230-60-3
WEIGHT
Uncrated: 308 lbs. (140 kg) approximate; Crated: 342 lbs. (155 kg) approximate: SS Head – add 20 lbs. (9 kg).
DIMENSIONS CRATED
L=32” (81.3 cm), W=40” (101.6 cm), H=41” (104 cm).
-
Dynacube Manual Dicer
Simple and practical, the Dynacube dices vegetables, fruits and cooked meats rapidly and efficiently. The patented grid system made with surgical stainless steel blades gives a clean consistent cut with 100% product yield, while ensuring safe operation with no direct contact with blades.
Comes complete with 1 of 5 different size grid sets and corresponding pusher. Grid sizes are approximations.